Product Description
8机8流-165方连铸机 8 Strands 165x165mm Casting Machine
Infrared Length Measurement：
Non-contact detection of the end position changes of high-temperature steel (which is usually in a red-hot state) by using infrared temperature sensors. Suitable for high temperatures: Specifically designed for detecting red-hot steel, it performs relatively stably in harsh environments such as high temperatures, much dust, and water mist .
Laser Length Measurement：
The position changes of the steel end face are precisely measured non-contact by using laser distance sensors (such as laser rangefinders and laser scanners). High precision: Modern laser ranging technology has an extremely high accuracy, reaching ±1mm or even higher (±0.05% - 0.1%), making it the most precise among the three technologies. Fast response speed: High sampling rate, suitable for high-speed production lines.
Contact Ball Hot Metal Detectors HMDs：
The approach metal detected by contacting the surface of the steel and using a high-frequency oscillation coil to induce the change in eddy current loss caused by the metal object. It is not affected by environmental light, temperature, water vapor or dust.
5 Strands 150x150mm Casting Machine
Intelligent Fixed Weight Fixed Length System：
The wear of the mold, changes in molten steel pressure and drawing speed and other factors directly affect the size and density of the product, resulting in different actual weights of the same length at different times in the same flow, with obvious differences. This difference makes it unable to control the weight of the raw materials when the billets undergo the next rolling process. As raw materials are either too short or too long, which directly affects the yield of steel rolling and causes economic losses.
Gantry Hanging Weigh Gantry Hanging Roller.T Weigh Push-up Roller.T Weigh
This system precisely weighs the cut billets, in combination with a multi-model strategy, realizes dynamic, closed-loop control and adjustment of the theoretical and actual values of the billet weight and the cutting length, ultimately achieving constant weight for billets.
