Product Description
Technical features and process parameters
Technical features:
1.The racks and cylinder are both with internal water cooling, increasing the life of the blades and seals.
2.Four edges of the blade can be rotated , increase the usage rate of the blade (about 50 to 80 thousand times per blade)
3.Due to adopting PLC programmable controller control , the system works stably and reliably.
4.Adopt automatic sizing shearing device; Flat shear (diagonal shearing, tiny head, convenient for rolling mill), small size error.
1.The temperature of billet is controlled above 800 degrees,normal shear section: 80 x 80mm ~ 180 x 180mm
2. The shear cylinder diameter:560mm;Instantaneous shearing time:3s
The power of pump set:37KW(A dual-use equipment )
Costs comparison between traditional flame cutting (including manual cutting) and hydraulic shear :
NO. | Expense | Flame cutting (including manual cutting) | Hydraulic shear | Remarks |
1 | Kerf | 4~6mm | Nothing | |
2 | Fuel | Oxygen and acetylene | Hydraulic fluid | Hydraulic fluid can be circularly used,ignorant to most of it |
3 | Consumable Supplies
| Cutting nozzle and flame cutting torch | Blade | 50 to 80 thousand times per blade,ignorant to most of it |
4 | Labour force | Hand-cut and Slag removal | ||
5 | CaloricExpenditure | Cutting time:20S~25S | Cutting time:3S~5S |
