content is empty!
Product Description
Technical features and process parameters
Technical features:
one
Both the frame and the cylinder have internal water cooling, which increases the life of the blades and seals.
two
The four sides of the blade can rotate, increasing the utilization rate of the blade (about 50,000~80,000 times per blade)
three
The system is controlled by PLC, which is stable and reliable.
four
Adopt automatic sizing and shearing device;
Flat shear (diagonal shear, small head, convenient for rolling mill), small size error.
five
The billet temperature shall be controlled above 800 degrees, and the normal shear section: 80 × 80mm ~ 180 × 180mm
six
Shearing cylinder diameter: 560mm; Instantaneous shear time: 3s
The power of pump set:37KW(A dual-use equipment )
Costs comparison between traditional flame cutting (including manual cutting) and hydraulic shear :
NO. | Expense | Flame cutting (including manual cutting) | Hydraulic shear | Remarks |
1 | Kerf | 4~6mm | Nothing | |
2 | Fuel | Oxygen and acetylene | Hydraulic fluid | Hydraulic fluid can be circularly used,ignorant to most of it |
3 | Consumable Supplies
| Cutting nozzle and flame cutting torch | Blade | 50 to 80 thousand times per blade,ignorant to most of it |
4 | Labour force | Hand-cut and Slag removal | ||
5 | CaloricExpenditure | Cutting time:20S~25S | Cutting time:3S~5S |