What are the operating characteristics of different continuous casting machines?

The continuous casting machine is capable of pouring molten steel at a high temperature of more than 1500 degrees Celsius into a refractory-lined intermediate tank above the mold, and then cooling it through a mold (the inner wall of which can be cooled by water to protect itself), And after the outlet of the mold, the end of the steel cooled into a solid state is clamped and pulled, and the whole set of mechanical equipment for continuous casting of the steel billet is cast.

• What are the preparations for continuous casting machine operation?

• What are the operating characteristics of different continuous casting machines?

• What are the advantages of the continuous casting machine process?

What are the preparations for continuous casting machine operation?

1. Turn on the main circuit of the tension leveling machine, at this time, the "auxiliary on" signal light on the P4 operation table and the P3 operation box of each flow is on.

   
   

2. The hydraulic station is working and the system pressure is normal. On the P4 console, press the button "Starting the hydraulic pump and oil pump of the tension leveler". At the same time, the "oil pump start" signal light on the P4 console is on.

   
   

3. Tension leveling machine status: On the P4 console, select "lift leveling roller" and "lift leveling machine frame", and the oil cylinder is in the rising position.

   
   

4. The operation right selects P4 console operation. At this time, if the above conditions are not satisfied, the indicator light of "send ingot" will flash.

What are the operating characteristics of different continuous casting machines?

1. Vertical continuous casting machine: The shell of this casting machine is cooled evenly and is not affected by bending and straightening, so it is not suitable for internal and surface cracks, which is conducive to the floating of inclusions, but its equipment height is large, the operation is inconvenient, and the investment cost High, equipment maintenance and accident handling are difficult, the slab section, fixed length and pulling speed are limited, and the slab belly deformation is prominent due to the large hydrostatic pressure of the molten steel.

   
   

2. Vertical bending continuous casting machine: the tundish, mold, guide roller and dummy bar of the casting machine are distributed along the vertical line. The cutting machine of the tension leveler is arranged horizontally. The casting and cooling and solidification are completed in the vertical direction. After complete solidification, it is bent by 90°, enters the bending section, and unloads the billet in the horizontal direction. The height of the casting machine is lower than that of the vertical type, which is convenient for transportation. , which can meet the requirements of longer fixed length, but due to the addition of one bending and straightening, one will cause cracks.

What are the advantages of the continuous casting machine process?

1. Simplify the production process and the production cycle is short;

   
   

2. Small footprint;

   
   

3. Less investment in fixed assets;

   
   

4. High metal yield;

   
   

5. Good steel performance;

   
   

6. Low energy consumption;

   
   

7. The factory staff capacity is greatly reduced;

   
   

8. Good working conditions, easy to realize automation.

Would you like to order a continuous casting machine? If necessary, you can contact Fujian Xin Yanchuang Technology Co., Ltd. You will supply the continuous casting machine of best quality.