Induction Furnace Hydraulic Charging Car

The main function

1.After feeding car to realize centralized feeding, reduce feeding times and time, output.

2.The rapidly compressed scrap steel is added to the intermediate frequency furnace, thereby reducing labor costs.

3.Remote control operation, simple and convenient field operation.

4.The transport and dumping work of the feeding truck, to help dust collection and treatment.

Main advantages:

1. The scrap steel is added to the furnace quickly and centrally, instead of manualor sucker operation, so as to reduce labor intensity (high temperature radiation at furnace mouth) and labor cost.

2. The centralized feeding mode is realized by the rear feeding truck, which reduces the frequency and time of feeding in the original process, greatly improves the charging efficiency and makes the lF work at full load, thus increasing the output.

3. The transportation and tilting of the charger vehicle eliminate the contradiction which the original hanging chuck impacts on the space of the dedusting system, thus contributing to the dust collection.

4. The remote control operation of the equipment is helpful to the simple and convenient operation on the spot.

Main technical parameters

1.Hopper loading: ≤ 5T;

2.Hopper tipping Angle range: 0 ° ~ 30 °

3.Tipping cylinder stroke: 0 ~ 710mm

4.The overall size of the equipment is L×W×H: 6517×2258×1688

5.Tipping cylinder thrust: 0 ~ 10T;

6.System pressure: 0 ~ 16Mpa；

7.Walking motor: 7.5KW ×1

8.Walking speed: 25m/min

9.Track spacing: 1500mm

10. wireless remote control operation: linear distance 100m

11.Electric cabinet voltage: 380V

12. Front arc plate of hopper of feeding car.

14.The general components used in the electric control part of the feeding truck are Schneider brand.

1. Keep away from heat source, remote control operation, smooth start to ensure safe operation

2. Drive the cylinder to turn over gently with the supply pressure

3. Load steel scrap

4. Steel and plate are welded together

5. It is assembled by motor, reducer, gear and wheel

6. When moving in front and back of the feeding car, it plays the role of folding and loosening the cable